Why should I register my crossbow? Submitted by: Becky
Your Mission® bow is warranted against defects in materials and workmanship to the original registered owner when purchased at an authorized retailer, for the life of the original owner. This includes all bow parts except the string, buss cables, cable slide, rubber string suppressors, monkey tails, string grub and cosmetic appearance ( chips, dings, scratches) caused by normal use and wear. All warranty claims are processed through an authorized Mission® Retailer. Your authorized Mission® Retailer will contact a Mission® Warranty Technician on your behalf. Any and all warranties, written or implied, are void with any alterations to the bow including cosmetic refinishing.
How do I register my crossbow ? Submitted by: Becky
The retailer you purchased your crossbow from may have registered your bow for you. However, you can register your crossbow by creating a Mission Community account. Click here to create your account or log in to register your bow.
Where is the serial number on my crossbow? Submitted by: Becky
Can I store my crossbow cocked for an extended period of time? Submitted by: Becky
It is acceptable to have your Mission crossbow cocked while in hunting situations. However Mission recommend you discharge the bolt into a discharge target to reduce the stress on the limbs after the hunt. We do not recommend storing or transporting your bow in the cocked position.
Can I cock my crossbow with my hands? Submitted by: Becky
All Mission crossbows are supplied with cocking ropes to avoid injury to hands and to ensure the crossbow is cocked properly. We always recommend using the cocking aid when cocking your crossbow.
Can I use Flat crossbow nocks? Submitted by: Becky
No, most crossbow dry fires occur because of nock failure. Mission recommends using Mission Aluminum half moon nocks to greatly reduce the chances of a nock failure.
How do I adjust the draw weight of my crossbow? Submitted by: Becky
Using a 7/32 hex wrench you insert this into the front limb bolts and turn in even increments on each side. 1 full turn is approximately 7# on the 360 and 9# on the 320.
Can I use a fixed blade broadhead with my crossbow? Submitted by: Becky
Yes. You can use any 3 blade fixed head that has a cutting diameter of 1-1/8” or less. We do not recommend using 4 blade broadheads.
How do I “un-cock” my crossbow? Submitted by: Becky
The safest and recommended procedure for unloading or un-cocking your crossbow is to fire a bolt/ arrow equipped with a field point into a recommended crossbow target or into debris-free ground.Never fire your crossbow bolt into the ground farther than 5 feet away to avoid a ricochet and to avoid losing your bolt/ arrow. Never attempt to “un-cock” your crossbow by hand or with a cocking rope.
How do I know when to replace my string? Submitted by: Becky
If you notice that your string has broken or severely frayed strands, you should immediately replace both your string and cables. String life expectancy depends on the volume of shooting and the care of the string. We recommend waxing your string and cables with Zebra Brand High Performance String Wax to increase the longevity of your string.